Iphone Simulator Mac Without Xcode

While developing for iOS, the simulator is a great resource. It's a great way of testing the apps without a physical device. Its friendly graphical interface can speed things up and emulate very well many features of real devices. But using the terminal is also a great way to speed things up and the only way to create useful scripts for Continuous Integration servers. The Simulator.app is not available standalone, therefore you need Xcode installed on your Mac: Install Xcode ( Mac App Store) Open the Automator.app and create a new “Application”-workflow. Add the Automator-Action “Launch Application” into the workflow-area. Using it’s dropdown, scroll to the bottom and choose “Other”. In this article, I collected several options on how to launch the simulator from the Terminal, folder, search, and Xcode. Choose which option you like more and use. The basic way to open a list of. Both complete without error, but Xcode still can't build. 2) I've set excluded architectures to 'Arm64' on the project, target and pod project. 3) I've added x86 64 and i386 to Architectures for project, target and pod project. 4) I've set all configurations to 'Build Active Architecture Only' to Yes. 5) I've even created (and deleted) a 'VALID. Jun 17, 2020 From Xcode menu Open Developer Tool - Simulator. From simulator select the device where you want to install the application. Open the Terminal application and execute the following command: xcrun.

Iphone Simulator Mac Without Xcode Activation
Install Ipa On Ios Simulator
Ios Simulator Install App
Ios Simulator For Mac

There are some features of iOS apps that don’t work from the iOS simulator. Maybe you want to test how your application works with the device camera or send an SMS message from your application. For these examples and more you’ll need to test and debug your app using a real device.

This post will walk through how to run the Xcode simulator on your iPhone or other iOS device and show you how to fix some common errors you’ll see along the way.

How to select your iPhone as the “Simulator” Device

Simulator is in quotes here since this will create an actual app on your phone; it’s no longer a simulation. Open up a project in Xcode and click on the device near the Run ▶ button at the top left of your Xcode screen.

Plug your iPhone into your computer. You can select your device from the top of the list.

Unlock your device and (⌘R) run the application. You’ll see Xcode install the app and then attach the debugger. The application should pop up on your phone.

Troubleshooting Common Errors

The first time I tried to connect my iPhone to Xcode it didn’t work. According to my best friend, Stack Overflow, I’m not the only one who has had issues. Let’s share the fixes to some common errors you might encounter.

“Signing Requires a Development Team”

Xcode requires that you’ve connected a Team to your project in order to run the simulator on a device. You can do this from the “General” tab of your Project Settings. As of Xcode 7 this can be any Apple ID.

Open the Team menu that currently says “None” and select your team. If you don’t have a team, select “Add an Account...” and create one with your Apple ID.

Xcode claims your device is locked when it isn’t

This fun bug has been happening since at least Xcode 6. There are a lot of potential solutions in this Stack Overflow post. Here’s what worked for me:

Unplug your iPhone
Reset Location & Privacy on your iPhone. Found under Settings >> General >> Reset
Plug in your iPhone
Hit Trust when prompted to Trust This Computer

You can learn more about how trusting computers works from Apple’s support.

Iphone Simulator Mac Without Xcode Activation

“iPhone is Busy”

The unsatisfying answer for this one is to just wait.

If you don’t have a sword fighting partner, you can try the following:

Unplug your device
Restart both Xcode and your iPhone
Plug in your device

That worked for me, but a lot of folks had luck with “Solution #3” from this Stack Overflow post.

Activate your Debugging Superpowers

The Jasonette docs FAQ has some more tips if you have other related issues. Now that you’ve got your application running on a device you can make the most of your testing and debugging experience with these tips:

If you have any questions or run into any other issues, feel free to reach out to me on Twitter @kelleyrobinson.

Important:The information in this document is deprecated in Xcode 9. For Xcode 9 and later, see Simulator Help by choosing Help > Simulator Help in Simulator.

Simulator app, available within Xcode, presents the iPhone, iPad, or Apple Watch user interface in a window on your Mac computer. You interact with Simulator by using the keyboard and the mouse to emulate taps, device rotation, and other user actions.

The chapter presents the basics of using Simulator. You can perform these steps using your own iOS app or, if you do not have an app to use, with the HelloWorld sample code. For more detailed information on interacting with Simulator and using it to test and debug your apps, refer to the later chapters in this guide.

Access Simulator from Xcode

There are two different ways to access Simulator through Xcode. The first way is to run your app in Simulator, and the second way is to launch Simulator without running an app.

Running Your iOS App

When testing an app in Simulator, it is easiest to launch and run your app in Simulator directly from your Xcode project. To run your app in Simulator, choose an iOS simulator—for example, iPhone 6 Plus, iPad Air, or iPhone 6 + Apple Watch - 38mm—from the Xcode scheme pop-up menu, and click Run. Xcode builds your project and then launches the most recent version of your app running in Simulator on your Mac screen, as shown in Figure 1-1.

Note: If you are testing an app with a deployment target of iPad, you can test only on a simulated iPad. If you are testing an app with a deployment target of iPhone or universal, you can test on either a simulated iPhone or a simulated iPad.

Running Your watchOS App

To run your WatckKit app, choose a combination of an iOS device and watchOS device from the Xcode scheme pop-up menu. For example, to run the watch app in a 38mm watch paired with an iPhone 6, choose 'iPhone 6 + Apple Watch - 38mm' from the scheme pop-up menu.

Running the WatchKit target launches two simulators, one for the iOS device and one for the watchOS device. Figure 1-2 shows an iPhone 6 and a 42mm watch running in two different simulators.

Running Your tvOS App

To run your tvOS App, choose a tvOS device from the Xcode scheme pop-up menu. Running the tvOS target launches the most recent version of your app in a simulated new Apple TV device, as shown in Figure 1-3.

Launching Simulator Without Running an App

At times, you may want to launch Simulator without running an app. This approach is helpful if you want to test how your app launches from the Home screen of a device or if you want to test a web app in Safari on a simulated iOS device.

To launch a Simulator without running an app

Launch Xcode.
Do one of the following:
- Choose Xcode > Open Developer Tool > Simulator.
- Control-click the Xcode icon in the Dock, and from the shortcut menu, choose Open Developer Tool > Simulator.

To launch a watchOS Simulator without running an app

Launch Xcode.
Do one of the following:
- Choose Xcode > Open Developer Tool > Simulator (watchOS).
- Control-click the Xcode icon in the Dock, and from the shortcut menu, choose Open Developer Tool > Simulator (watchOS).

Simulator opens and displays the Home screen of whichever simulated device was last used.

View the Installed Apps

From the Home screen, you have access to all of the apps that are installed in the simulation environment. There are two ways to access the Home screen in Simulator from your app:

Press Command-Shift-H.
Choose Hardware > Home.

Use the installed apps to test your app’s interaction with them. For example, if you are testing a game, you can use Simulator to ensure that the game is using Game Center correctly.

Install Ipa On Ios Simulator

iOS Device Home Screen

Much like the Home screen on an iOS device, the simulator’s iOS Home screen has multiple pages. After clicking the Home button (or accessing the Home screen through the Hardware menu), you arrive at the second page of the Home screen. To get to the first page, where all of the preinstalled apps are found, swipe to the first Home screen by dragging to the right on the simulator screen.

On the Home screen, you see that all of the apps that have been preloaded into Simulator. See iOS Device Home Screen.

The apps that you see on the Home screen are specific to the iOS device simulation environment. Because Passbook and the Health app are available only for the iPhone, these apps don’t appear if you are simulating a legacy device or an unsupported device type.

watchOS Device Home Screen

The Home screen for a simulated watchOS device behaves the same as it would on an actual device. You can click and drag to simulate the finger dragging around the screen and launch an app by clicking on it. Figure 1-4 shows the home screen of a 42mm watch with a developer app, the Lister sample code.

Use Safari to Test Web Apps

From the Home screen, you can access Safari within Simulator. Use Safari to test your iOS web apps directly on your Mac.

From the Home screen, click Safari.
In the address field in Safari, type the URL of your web app and press the Return key.

If your Mac is connected to the Internet, it displays the mobile version of the URL you specified. For example, type apple.com into the address field and press Return. Safari displays the Apple website. See Figure 1-6.

Use Maps to Simulate Location Awareness

Simulator provides tools to assist you in debugging your apps. One of the many features you can debug in Simulator is location awareness within your app. Set a location by choosing Debug > Location > location of choice. The menu has items to simulate a static location or following a route.

A simulated watchOS device with the location set to None checks the paired iPhone device for the location.

You can specify your own location, which can be seen in the Maps app.

From the Home screen, click Maps.
Choose Debug > Location > Custom Location.
In the window that appears, type the number 40.75 in the latitude field and the number -73.75 in the longitude field.
Click OK.
Click the Current Location button in the bottom-left corner of the simulated device screen.

After completing this task, notice that the blue dot representing your location is in New York, NY, near the Long Island Expressway, as shown in Figure 1-7.

Change the Simulated Device and OS Version

Simulator provides the ability to simulate many different combinations of device type and OS version. A device type is a model of iPhone, iPad, or Apple TV. Some iPhone devices can also have a paired Apple Watch. Each device-OS combination has its own simulation environment with its own settings and apps. Simulator provides simulators for common device-iOS, device-watchOS-iOS device, and device-tvOS combinations. You can also add simulators for a specific combination you want to test. However, not all device type and OS version combinations are available.

Note: To test apps for the iPad mini, use a simulated iPad with the same pixel resolution as the iPad mini.

You can switch between different device-OS combinations. Switching closes the window for the existing device and then opens a new window with the selected device. The existing device goes through a normal OS shutdown sequence, though the timeout might be longer than the one on a real device. The new device goes through a normal OS startup sequence.

To change the simulated device

Choose a Hardware > Device > device of choice.
Simulator closes the active device window and opens a new window with the selected device.

If the device type and OS version combination you want to use is not in the Device submenu, create a simulator for it.

To add a simulator

Choose Hardware > Device > Manage Devices.
Xcode opens the Devices window.
At the bottom of the left column, click the Add button (+).
In the dialog that appears, enter a name in the Simulator Name text field and choose the device from the Device Type pop-up menu.
Choose the OS version from the iOS Version pop-up menu.
Alternatively, if the iOS version you want to use isn’t in the iOS Version pop-up menu, choose “Download more simulators” and follow the steps to download a simulator.
Click Create.

If the OS version you want to use is not installed, download it and follow the steps to add a simulator again.

To download a simulator

In Xcode, choose Xcode > Preferences.
In the Preferences window, click Downloads.
In Components, find the legacy simulator version you want to add, and click the Install button.

You can also delete and rename simulators in the Devices window.

Ios Simulator Install App

To delete a simulator

In Simulator, choose Hardware > Device > Manage Devices, or in Xcode, choose Window > Devices.
Xcode opens the Devices window.
In the left column, select the simulator.
At the bottom of the left column, click the Action button (the gear next to the Add button).
Choose Delete from the Action menu.
In the dialog that appears, click Delete.

To rename a simulator, choose Rename from the Action menu and enter a new name.

For how to manage real devices that appear in the Devices window, read Devices Window Help.

Alter the Settings of the Simulated Device

You can alter the settings within Simulator to help test your app.

On a simulated device, use the Settings app. To open the Settings app, go to the Home screen and click or on tvOS, choose Settings. In Figure 1-8 you see the Settings app as it appears when launched in the iOS simulation environment.

The Simulator settings differ from the settings found on a hardware device. Simulator is designed for testing your apps, whereas a hardware device is designed for use. Because Simulator is designed for testing apps, its settings are naturally focused on testing, too. For example, in a simulated iOS device the Accessibility menu provides the ability to turn on the Accessibility Inspector, and the Accessibility menu on a device allows you to turn on and off different accessibility features.

Through the settings, you can test both accessibility and localization of your app. See Testing and Debugging in iOS Simulator for information on how to manipulate your settings for the various types of testing you are interested in.

Remember: Changes made in the Settings app of simulated device affect only the simulation environment that is currently running.

Rotate iOS Devices

You can use Simulator to manipulate the simulated device much as you do a physical device.

To rotate your simulated device, choose Hardware > Rotate Left. When you rotate your simulated device, Settings rotates (see Figure 1-9), just as it would on a hardware device.

Test in Simulator and on a Device

Ios Simulator For Mac

Simulator is designed to assist you in designing, rapidly prototyping, and testing your app, but it should never serve as your sole platform for testing. One reason is that not all apps are available in the simulator. For example, the Camera app is available only on hardware devices and cannot be replicated in the simulator.

In addition, not all bugs and performance problems can be caught through testing in Simulator alone. You’ll learn more about performance differences in Testing and Debugging in iOS Simulator. You can also find more information on testing your app on a device in Launching Your App on Devices in App Distribution Guide.

Quit Simulator

Simulator continues running until you quit it. Quitting Xcode will not close Simulator because they are separate applications. Similarly quitting simulator will not close Xcode.

To quit Simulator, choose Simulator > Quit Simulator. The device is shut down, terminating any running apps.

Note: Both Simulator and watchOS Simulator can be open at the same time.